Warning tape how to maintain in daily

0010010 nbsp; 0010010 nbsp;Warning tapeAlso called logo tape, ground tape, floor tape, landmark tape, etc. It is a tape made of PVC film and coated with rubber-type pressure-sensitive adhesive.

Features

0010010 nbsp; 0010010 nbsp; Warning tape has the advantages of waterproof, moisture-proof, weather-proof, anti-corrosion, anti-static, etc. It is suitable for the corrosion protection of underground pipes such as wind pipes, water pipes, oil pipelines and so on.

1. Strong viscosity, can be used for ordinary cement floor

2. Compared with scratching paint on the ground, the operation is simple

3. It can be used not only on ordinary floors, but also on wooden floors, tiles, marbles, walls, and machines (and floor paint can only be used on ordinary floors)

4. The paint cannot draw two-color lines. Specifications: width 4. {{2}} cm, length 21 m, total 1. { {5}} m2; thickness 0. 1 4 mm

Storage and maintenance

1, tape should be stored in the warehouse to prevent the sun and rain; stop contact with acid and alkali oil inorganic solvents, adhere to clean and dry, away from the found installation 1 m, room temperature is-{{0} } 5 ℃ ~ 40 ℃.

2. The tape should be placed in rolls without folding, and it should be turned quarterly if the storage time is too long.

3. It is best to use a crane when loading and unloading the belt, and use a rigging with a beam to bump up to prevent damage to the edge of the belt.

4 The type and specifications of the adhesive tape should be selected according to the application requirements and detailed conditions.

5. It is not allowed to use different types, different specifications, models, strengths, and fabric layers of tape (matching) together.

6. It is best to use hot vulcanized adhesive joints to ensure the reliability of the joints and to maintain a higher invalid strength.

7. The diameter of the conveyor roller of the feeder and the minimum pulley diameter of the conveyor belt should conform to the relevant rules.

8 Do not make the tape snake or creep, stick to the roller, the roller is sensitive, and the tension is excessive.

9 When the baffle is equipped with a baffle and installed cleanly, the tape should be prevented from being worn.

10 Cleanliness is the fundamental condition for the good operation of the tape. Foreign substances will affect the fairness of the tape, the difference in tension, and even breakage.

11. When it is found that the tape has a late damage scene, it should find the reason and repair it in time to prevent the presentation of bad results.